Epifanes 2-comp Polyurethane clearcoat

Epiphanes' two-component polyurethane varnish consists of - a base part (A) and a hardening part (B). A total of 750 gr.

The components must be mixed well before use. Epifane's two-component polyurethane varnish contains polyester and polyurethane compounds which make it very durable and well adapted for both indoor and outdoor use. The paint has a very good UV filter that effectively protects the surface from sunlight in all climatic conditions.

Interior and exterior above the waterline on e.g. plywood and epoxy. As a complement together with existing urethane paint systems. Mixing of components A and B - Mixing ratio by weight: Mix 1 part of component B (hardener) with 2 parts of component A (base). Stir them well together. Use weight and mixing beaker if small amounts are desired. Let the mixture stand for 10-15 minutes before use. Application time: The mixture can be used 4 hours at 10 ° C, 3 hours at 20 ° C, and 2 hours at 30 ° C. Application temperature: The temperature of the varnish, substrate and air must not be lower than 10 ° C or higher than 30 ° C during application. The ideal air temperature for application is 15-18 ° C. Relative humidity should not be lower than 50% or exceed 80%. Add at least 6 layers.

The surface must be cleaned, degreased, sanded and dry. Remove all dust before painting. The moisture content must be lower than 15%. Curing time at 20 ° C and 65% relative humidity: Dust dry after 2 hours, new layer can be applied after 24 hours. Sanding between coats is not necessary if the next coat is applied within 48 hours. The varnish is fully cured after 7 days. At higher or lower temperatures, the above times are prolonged or shortened. Recommended thinner: When applied with a brush / roller: Epifanes Brush thinner for two-component paint and varnish. • For spray application: Epifanes Spray thinner for two-component paint and varnish. Thinning of the varnish by brush / roller application: If desired with a better flow and longer use time - mix 0-5% thinner in the varnish. Do not mix thinner in the paint before components A and B are well mixed and have stood for 10-15 minutes.

Coverage: Approx. 9 m² per 750 gr. About 36 m² per 3 k